Plate Titanium Murni Titanium Alloy Sheet
Katrangan
Spesifikasi Plate Titanium Murni / Titanium Alloy Sheet:
Bahan Kelas: Gr1, Gr2, Gr3, Gr4, Gr5, Gr7, Gr6, Gr9, Gr11, Gr12, Gr16, Gr17, Gr25, TA0, TA1, TA2, TA5, TA6, TA7, TA9, TA10, TB2, TC1, TC2 ,TC3,TC4
Standar ASTM B265, ASME SB265, DIN17851, TiA16Zr5Mo1.5, JIS4100-2007, GB3461-2007
ukuran:
Cold rolled: Tebal 0.02mm ~ 5mm * Jembar maksimal 1500mm * Panjang maksimal 2500mm
Hot rolled: Tebal 5mm ~ 100mm * Jembar maksimal 3000mm * Panjang maksimal 6000mm
Aplikasi Plate Titanium Alloy
1. Adhedhasar intensitas dhuwur, kekuatan tarik produk titanium bisa nganti 180Kg / mm².
2. Titanium lan alloy titanium ing industri penerbangan, diarani "logam ruang";Kajaba iku, ing industri galangan kapal, industri kimia, bagean mesin manufaktur, peralatan telekomunikasi, paduan keras, lan liya-liyane duwe aplikasi sing saya akeh ekstensif.
3. Kajaba iku, amarga paduan titanium karo awak manungsa nduweni kompatibilitas sing apik banget, mula paduan titanium uga bisa dadi balung gawean.
6AL-4V titanium Gr5 uga dikenal minangka Ti6Al4V, Ti-6Al-4V, Ti6-4 utawa Titanium 6Al-4V Alloy, minangka paduan sing paling umum digunakake.Luwih kuwat tinimbang titanium murni komersial nalika nduweni kaku lan sifat termal sing padha.AMS 4911 6AL-4V titanium sheet & plate minangka pilihan gedhe saka lembaran titanium pesawat ing macem-macem spesifikasi.
Fitur AMS 4911 6AL-4V Lembar & Plat Titanium
● Kapadhetan Kurang lan Kekuwatan Spesifikasi Dhuwur.
● resistance apik kanggo efek saka panas.
● Low Modulus saka Elastisitas.
● Sifat termal sing apik.
Komposisi Kimia saka Titanium lan Titanium Alloy
| sasmita | N | C | H | Fe | O | Al | V | Pa | Mo | Ni | Ti |
| Gr1 | 0.03 | 0.08 | 0.015 | 0.2 | 0.18 | / | / | / | / | / | Bal |
| Gr2 | 0.03 | 0.08 | 0.015 | 0.3 | 0.25 | / | / | / | / | / | Bal |
| Gr3 | 0.05 | 0.08 | 0.015 | 0.3 | 0.35 | / | / | / | / | / | Bal |
| Gr4 | 0.05 | 0.08 | 0.015 | 0.5 | 0.4 | / | / | / | / | / | Bal |
| Gr5 | 0.05 | 0.08 | 0.015 | 0.4 | 0.2 | 5.5-6.75 | 3.5-4.5 | / | / | / | Bal |
| Gr7 | 0.03 | 0.08 | 0.015 | 0.3 | 0.25 | / | / | 0.12-0.25 | / | / | Bal |
| Gr9 | 0.03 | 0.08 | 0.015 | 0.25 | 0.15 | 2.5-3.5 | 2.0-3.0 | / | / | / | Bal |
| Gr12 | 0.03 | 0.08 | 0.015 | 0.3 | 0.25 | / | / | / | 0.2-0.4 | 0.6-0.9 | Bal |
Kekuwatan Tensile saka Titanium lan Titanium Alloy
| sasmita | Elongasi (%) | Kekuwatan Tarik (Min) | Kekuwatan Ngasilake (Min) | ||
| ksi | Mpa | ksi | Mpa | ||
| Gr1 | 24 | 35 | 240 | 20 | 138 |
| Gr2 | 20 | 50 | 345 | 40 | 275 |
| Gr3 | 18 | 65 | 450 | 55 | 380 |
| Gr4 | 15 | 80 | 550 | 70 | 483 |
| Gr5 | 10 | 130 | 895 | 120 | 828 |
| Gr7 | 20 | 50 | 345 | 40 | 275 |
| Gr9 | 15 | 90 | 620 | 70 | 438 |
| Gr12 | 18 | 70 | 438 | 50 | 345 |